MikeHaganAntiqueAutoRadio.com

Skip to Main Content »

Search Site

Select Your Currency

 

CD changers and Speakers

Items 31 to 40 of 60 total Page:
  1. Previous
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction
RetroMod® 5.25" 80 watt 2 way Upgraded Replacement Speakers (sold as a pair)
$ 79.00
NEW UNDER 1.5" MOUNTING DEPTH!! Designed and tooled from the ground up, the speakers meet the demand of today's high performance amplifiers while maintaining factory dimensions for original location mounting and are compatible with all digital music sources. The "N" Series features ultra thin sub 1.77" mounting profiles to fit in virtually any installation application. These units have neodymium magnet structures which are 5 times more powerful than standard speaker magnets, allowing for a substantial reduction in mounting depth and feature enhanced power handling and heat dissipation characteristics.

These 5.25" speakers have grills and are designed and sized to fit in an OEM location, due to their ULTRA thin mounting profile, you can mount them places other competitor's 5.25" speakers cannot fit. Please note that you are purchasing TWO 5.25" speakers, which are full range speakers with single Mylar tweeter assembly, rigid treated paper cone, Santoprene weather resistant surround, under 1.50" mounting depth and custom tooled low carbon steel black basket.

Power Handling Specs: (40 Watts RMS, 80 Watts Max Power)


Speaker Dimensions below:
Learn More

Add to Wishlist | Add to Compare

R-TB8 FULL RANGE SPEAKER SYSTEM
$ 169.99
The RetroSound R-TB8 is a ported full range speaker enclosure. These wedge shaped speaker boxes work great behind the seats of trucks, SUV's, hatchbacks and coupes. They feature an 8-inch bass driver for great low frequency response and soft-dome tweeters for smooth, clear highs. They are finished in a durable gray carpeting and have chrome speaker terminals. Power handling is 175 watts. Price is per two speaker boxes, one for the driver's side and one for the passenger side. Learn More

Add to Wishlist | Add to Compare

R-C652N 6.5" Water Resistant Component Kit
$ 139.00
(Scroll down for more info, including a video) A common problem in the installation of modern sound systems in classic vehicles is speaker placement. The kick panel on a vintage vehicle, for example, is a dangerous environment for most contemporary speakers. Venting systems on these vehicles commonly expose speakers to moisture, leading to damage, and ultimately to speaker failure.

To address this issue, RetroSound® has tooled and manufactured the first weather resistant audiophile quality component speaker system designed specifically for the classic automotive market. The RetroMod® R-C652N two-way component system makes use of poly cones and a sealed crossover network to protect the system from the elements. The mid-woofer uses a Santoprene® surround for an even, natural sound. Silk dome tweeters provide accurate high frequency reproduction without inducing ear fatigue. The RetroSound® RetroMod® R-C652N is simply the finest sounding speaker system ever produced for the classic restoration market.

* Neodymium magnet structure for high power handling in a slim-line design
* Inside of magnet is dip cut for increased pole piece excursion and better output
* Santoprene® surrounds – the best and most expensive surround material – for an even, natural sound
* Water resistant poly cones
* Sealed water resistant crossover network
* Silk dome tweeters for clear, accurate high frequency reproduction
* Includes mesh wire grilles
* Power handling: 85 Watts RMS / 150 Watts Max Power
Learn More

Add to Wishlist | Add to Compare

MUSTANG 4 X 8 DOOR SPEAKERS 1967-1971
$ 119.00
Designed and tooled from the ground up, the speakers meet the demand of today's high performance amplifiers while maintaining factory dimensions for original location mounting and are compatible with all digital music sources. These models feature neodymium magnet structures which are 5 times more powerful than standard speaker magnets, allowing for a substantial reduction in mounting depth and feature enhanced power handling and heat dissipation characteristics.

NOTE: These 4x8" speakers do NOT come with grilles, they are designed and sized to fit in an OEM or a custom location, due to their ultra thin mounting profile, you can mount it places other speakers cannot fit.
Please note that you are purchasing TWO 4x8" Single Voice Coil speakers, which are full range speakers with a low profile Mylar tweeter assembly, Single Voice Coil System, rigid poly cone, Santoprene surround, 1.37" thin mounting depth
and custom tooled low carbon steel chrome basket.


Power Handling Specs: (60 Watts RMS, 120 Watts Max Power)


Ford Stereo Speaker Fit Guide -- 4 x 8 Inch Speakers

The new RetroSound® RetroMod® R-483N is the speaker solution for Ford Mustangs and Thunderbirds that came with factory 4x8" speakers. Until now the most common solution for these vehicles was to use a 4x6" speaker in some sort of bracket. The R-483N provides 30% more cone area, with a corresponding increase in mid-bass response.

Ford Mustang 1967-71 4x8 Pair R-483N For Mustangs with Stereo Factory Radio
Ford Thunderbird 1966 4x8 Pairs* R-483N For T-Birds with Quadrophonic 8-Track Factory Radio

*1966 T-Birds use one pair of speakers in each door

Learn More

Add to Wishlist | Add to Compare

Kick Panels For A 1957 Chevrolet
$ 79.99
These kick panel mount easily in your 1957 Chevy Bel Air, 210, 150 or Nomad, and will fit most 6.5-inch speakers. The speaker mount is angled to direct sound upwards towards the listener, and not at your feet. Kit includes driver's side and passenger side kick panels. Learn More

Add to Wishlist | Add to Compare

Kick Panels for 1952-73 Volkswagen Beetle Sedan
$ 149.00
Deluxe Speakers

These 6.5-inch high-power R-652N speakers are a great way to upgrade the sound in your vintage. They use a neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.8-inches (51mm). Santoprene® surrounds deliver the most natural sound possible with no distortion. Mylar tweeters produce crisp, clear highs. Speaker grilles are included.

Add our RetroMat Sound Dampening Material:


Reduces road and wind noise plus lowers heat from your vehicle. Easy to cut 1.4mm thick matting with odorless self-adhesive backing. 3-ply construction: Butyl Rubber Membrane and Closed Cell Foam reduces exterior noise along with squeaks and rattles, Aluminum Sheeting provides thermal insulation and Strong Bitumen Adhesive combine for maximum quiet and easy installation.
•Two 10" x 10" Sheets (covers 1.4 sq ft)
•Great for Door Panels, Floorpans, Trunks, Speaker Kick-panels and more.
•Easy to apply (peel and stick), only 1.4mm thick.
•Reduces noise by as much as 10dB
•Part number MAT-10-SD

Learn More

Add to Wishlist | Add to Compare

Kick Panel Speakers for 1967-68 Ford Mustang
$ 189.99
These kick panel speakers mount easily in your 1967-68 Ford Mustang. The speaker mount is angled to direct sound upwards towards the listener, and not at your feet. The included R-612 speakers feature a ceramic magnet structure for an thin yet powerful design. Santoprene surrounds provide a smooth, natural sound and mylar tweeters produce crisp, clear highs. Magnets are dip-cut to allow for extended pole piece excursion and high output. Speaker grills are included. Note: these kick panels will not fit Mustang convertibles.




Learn More

Add to Wishlist | Add to Compare

Kick Panel Speakers for 1964-66 Ford Mustang Coupe/Fastback
$ 179.99
These kick panel speakers mount easily in your 1964-66 Ford Mustang coupe/fastback. The speaker mount is angled to direct sound upwards towards the listener, and not at your feet. The R-612 speakers feature a ceramic magnet structure for an thin yet powerful design. Santoprene surrounds provide a smooth, natural sound and mylar tweeters produce crisp, clear highs. Magnets are dip-cut to allow for extended pole piece excursion and high output. Speaker grills are included. Note: these kick panels will not fit Mustang convertibles. Learn More

Add to Wishlist | Add to Compare

Kick Panel Speakers for 1961-62 Chevrolet Impala/Bel Air/Biscayne
$ 189.99
These kick panel speakers mount easily in your 1961-62 Chevrolet Bel Air, Biscayne or Impala. The speaker mount is angled to direct sound upwards towards the listener, and not at your feet. The included R-612 speakers feature a ceramic magnet structure for an thin yet powerful design. Santoprene surrounds provide a smooth, natural sound and mylar tweeters produce crisp, clear highs. Magnets are dip-cut to allow for extended pole piece excursion and high output. Speaker grills are included.




Learn More

Add to Wishlist | Add to Compare

Kick Panel Speakers For 1960-66 Chevy Truck
$ 159.99
These kick panel speakers mount easily in your 1960-66 Chevy Truck. The speaker mount is angled to direct sound upwards towards the listener, and not at your feet. The included R-612 speakers feature a ceramic magnet structure for an thin yet powerful design. Santoprene surrounds provide a smooth, natural sound and mylar tweeters produce crisp, clear highs. Magnets are dip-cut to allow for extended pole piece excursion and high output. The kick panels may be painted to match your Chevy's interior. Speaker grills are included.
Learn More

Add to Wishlist | Add to Compare

Items 31 to 40 of 60 total Page:
  1. Previous
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction