MikeHaganAntiqueAutoRadio.com

Skip to Main Content »

Search Site

Select Your Currency

 

Speakers

RetroSound Radios are innovative radios and speakers designed and engineered for the Classic Car Market

RetroMod Speakers
Description: This is a good video to explain our new speakers in detail and also discuss what a Dual Voice coil speaker is.



Items 11 to 20 of 57 total Page:
  1. Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction
Retrosound RetroMod® R-48N 120 watt Dual Voice Coil ULTRA THIN 4x8" speaker
$ 89.00
This 4x8" speaker does not have a grill and is designed and sized to fit in an OEM location, due to its ultra thin mounting profile, you can mount it places other speakers cannot fit. Please note that you are purchasing ONE 4 x 8" Dual Voice Coil speaker, which is a full range speaker with a flush mount 2 way dual Mylar tweeter assembly, Dual Voice coil system, rigid pulp composite cone, Santoprene surround, 1.37" ultra thin mounting depth and custom tooled low carbon steel chrome basket. (NOTE: these and other modern speakers are generally not for use with original radios unless they can handle 4 or 8 ohm impedance loads)

Power Handling Specs: (60 Watts RMS, 120 Watts Max Power)
The new RetroSound® RetroMod® R-48N dual voice coil speaker is the perfect stereo solution to the single dash speaker in many vintage vehicles. These speakers are a direct-fit drop-in solution for Mercedes, International and some GM vehicles (see list below).

Mercedes

190C 1962-65
190DC 1962-65
200 1966-68
200D 1966-67
220B 1959-65
220SB 1959-65
220SB 1959-65
220SEB 1959-65
230 1965-66
230S 1965-68
230SL 1963-71
250SE 1965-67
250SL 1963-71
280SE 1969-71
280SEC 1967-71
280SL 1963-71
300SE 1961-65
300SEL 1962-65
BMW 2800 (E3 SERIES) 1969-74
International Scout 1961-65
Cadillac Cadillac 1958
Chevrolet Chevelle 1966-67 (W/ Air)
. Learn More

Add to Wishlist | Add to Compare

Retrosound RetroMod® 5.25" 80 watt 2 way Upgraded Replacement Speakers (sold as a pair)
$ 79.00
NEW UNDER 1.5" MOUNTING DEPTH!! Designed and tooled from the ground up, the speakers meet the demand of today's high performance amplifiers while maintaining factory dimensions for original location mounting and are compatible with all digital music sources. The "N" Series features ultra thin sub 1.77" mounting profiles to fit in virtually any installation application. These units have neodymium magnet structures which are 5 times more powerful than standard speaker magnets, allowing for a substantial reduction in mounting depth and feature enhanced power handling and heat dissipation characteristics.

These 5.25" speakers have grills and are designed and sized to fit in an OEM location, due to their ULTRA thin mounting profile, you can mount them places other competitor's 5.25" speakers cannot fit. Please note that you are purchasing TWO 5.25" speakers, which are full range speakers with single Mylar tweeter assembly, rigid treated paper cone, Santoprene weather resistant surround, under 1.50" mounting depth and custom tooled low carbon steel black basket.

Power Handling Specs: (40 Watts RMS, 80 Watts Max Power)


Speaker Dimensions below:
Learn More

Add to Wishlist | Add to Compare

Retrosound Retromod 6.5" DVC Speaker
$ 65.00
Available 10/22, order now! This is our new DVC version of our 6.5" speaker, this DVC speaker is handy for vehicles that had a single speaker mount in the back seat area (impalas, etc) You can connect 2 channels of audio to this speaker. For unique mounting situations, this speaker comes equipped with a threaded input that is compatible and comes with our UB1KT (Universal bracket kit). NOTE: Due to the specialized nature of this speaker, a grille is not included with it.
Learn More

Add to Wishlist | Add to Compare

Retrosound Retromod 5 x 7 Dual Voice Coil Speaker
$ 65.00
The Dual Voice Coil design allows you to connect 2 stereo channels from your radio to one speaker, providing you with maximum sound for a single speaker application! These types of speakers are generally used in "Classic" cars that only have one speaker location in the dash or the rear deck area, being able to connect 2 stereo channels to one speaker provides for a fuller, richer sound that a mono or single voice coil speaker cannot provide.

This 5x7" speaker does not have a grill and is designed and sized to fit in an OEM location (NOTE: these and other modern speakers are generally not for use with original radios unless they can handle 4 or 8 ohm impedance loads)-, due to its ultra thin mounting profile, you can mount it places other speakers cannot fit. Please note that you are purchasing ONE 5 x 7" Dual Voice Coil speaker, which is a full range speaker with a flush mount 2 way dual Mylar tweeter assembly, Dual Voice coil system, rigid pulp composite cone, Santoprene surround, 1.77" ultra thin mounting depth and custom tooled low carbon steel chrome basket.

Power Handling Specs: (60 Watts RMS, 100 Watts Max Power)
Specifications
Part Number: R-57N {single speaker only}
Dimensions:
Width: 7 in.
Height: 1.8 in.
Length: 5 in.
Weight: 2.5 lb. Learn More

Add to Wishlist | Add to Compare

Retrosound R-TB8 FULL RANGE SPEAKER SYSTEM
$ 169.99
The RetroSound R-TB8 is a ported full range speaker enclosure. These wedge shaped speaker boxes work great behind the seats of trucks, SUV's, hatchbacks and coupes. They feature an 8-inch bass driver for great low frequency response and soft-dome tweeters for smooth, clear highs. They are finished in a durable gray carpeting and have chrome speaker terminals. Power handling is 175 watts. Price is per two speaker boxes, one for the driver's side and one for the passenger side. Learn More

Add to Wishlist | Add to Compare

Retrosound R-C652N 6.5" Water Resistant Component Kit
$ 139.00
(Scroll down for more info, including a video) A common problem in the installation of modern sound systems in classic vehicles is speaker placement. The kick panel on a vintage vehicle, for example, is a dangerous environment for most contemporary speakers. Venting systems on these vehicles commonly expose speakers to moisture, leading to damage, and ultimately to speaker failure.

To address this issue, RetroSound® has tooled and manufactured the first weather resistant audiophile quality component speaker system designed specifically for the classic automotive market. The RetroMod® R-C652N two-way component system makes use of poly cones and a sealed crossover network to protect the system from the elements. The mid-woofer uses a Santoprene® surround for an even, natural sound. Silk dome tweeters provide accurate high frequency reproduction without inducing ear fatigue. The RetroSound® RetroMod® R-C652N is simply the finest sounding speaker system ever produced for the classic restoration market.

* Neodymium magnet structure for high power handling in a slim-line design
* Inside of magnet is dip cut for increased pole piece excursion and better output
* Santoprene® surrounds – the best and most expensive surround material – for an even, natural sound
* Water resistant poly cones
* Sealed water resistant crossover network
* Silk dome tweeters for clear, accurate high frequency reproduction
* Includes mesh wire grilles
* Power handling: 85 Watts RMS / 150 Watts Max Power
Learn More

Add to Wishlist | Add to Compare

Retrosound MUSTANG 4 X 8 DOOR SPEAKERS 1967-1971
$ 129.00
Designed and tooled from the ground up, the speakers meet the demand of today's high performance amplifiers while maintaining factory dimensions for original location mounting and are compatible with all digital music sources. These models feature neodymium magnet structures which are 5 times more powerful than standard speaker magnets, allowing for a substantial reduction in mounting depth and feature enhanced power handling and heat dissipation characteristics.

NOTE: These 4x8" speakers do NOT come with grilles, they are designed and sized to fit in an OEM or a custom location, due to their ultra thin mounting profile, you can mount it places other speakers cannot fit.
Please note that you are purchasing TWO 4x8" Single Voice Coil speakers, which are full range speakers with a low profile Mylar tweeter assembly, Single Voice Coil System, rigid poly cone, Santoprene surround, 1.37" thin mounting depth
and custom tooled low carbon steel chrome basket.


Power Handling Specs: (60 Watts RMS, 120 Watts Max Power)


Ford Stereo Speaker Fit Guide -- 4 x 8 Inch Speakers

The new RetroSound® RetroMod® R-483N is the speaker solution for Ford Mustangs and Thunderbirds that came with factory 4x8" speakers. Until now the most common solution for these vehicles was to use a 4x6" speaker in some sort of bracket. The R-483N provides 30% more cone area, with a corresponding increase in mid-bass response.

Ford Mustang 1967-71 4x8 Pair R-483N For Mustangs with Stereo Factory Radio
Ford Thunderbird 1966 4x8 Pairs* R-483N For T-Birds with Quadrophonic 8-Track Factory Radio

*1966 T-Birds use one pair of speakers in each door

Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels For A 1957 Chevrolet
$ 79.99
These kick panel mount easily in your 1957 Chevy Bel Air, 210, 150 or Nomad, and will fit most 6.5-inch speakers. The speaker mount is angled to direct sound upwards towards the listener, and not at your feet. Kit includes driver's side and passenger side kick panels. Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels for 1970-81 Chevrolet Camaro
$ 269.95
These 4x6-inch high-power R-463N speakers are a great way to upgrade the sound in your vintage. They use a neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.77-inches (45mm). Santoprene® surrounds deliver the most natural sound possible with no distortion. Mylar tweeters produce crisp, clear highs.

Add our RetroMat Sound Dampening Material:


Reduces road and wind noise plus lowers heat from your vehicle. Easy to cut 1.4mm thick matting with odorless self-adhesive backing. 3-ply construction: Butyl Rubber Membrane and Closed Cell Foam reduces exterior noise along with squeaks and rattles, Aluminum Sheeting provides thermal insulation and Strong Bitumen Adhesive combine for maximum quiet and easy installation.
•Two 10" x 10" Sheets (covers 1.4 sq ft)
•Great for Door Panels, Floorpans, Trunks, Speaker Kick-panels and more.
•Easy to apply (peel and stick), only 1.4mm thick.
•Reduces noise by as much as 10dB
•Part number MAT-10-SD
Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels for 1968-72 Pontiac LeMans with Factory Air Conditioning
$ 259.95
Deluxe Speakers

These 6.5-inch high-power R-652N speakers are a great way to upgrade the sound in your vintage. They use a neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.8-inches (51mm). Santoprene® surrounds deliver the most natural sound possible with no distortion. Mylar tweeters produce crisp, clear highs. Speaker grills are included.

Add our RetroMat Sound Dampening Material:


Reduces road and wind noise plus lowers heat from your vehicle. Easy to cut 1.4mm thick matting with odorless self-adhesive backing. 3-ply construction: Butyl Rubber Membrane and Closed Cell Foam reduces exterior noise along with squeaks and rattles, Aluminum Sheeting provides thermal insulation and Strong Bitumen Adhesive combine for maximum quiet and easy installation.
•Two 10" x 10" Sheets (covers 1.4 sq ft)
•Great for Door Panels, Floorpans, Trunks, Speaker Kick-panels and more.
•Easy to apply (peel and stick), only 1.4mm thick.
•Reduces noise by as much as 10dB
•Part number MAT-10-SD
Learn More

Add to Wishlist | Add to Compare

Items 11 to 20 of 57 total Page:
  1. Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction
 

My Cart

You have no items in your shopping cart.