MikeHaganAntiqueAutoRadio.com

Skip to Main Content »

Search Site

Select Your Currency

Browse By

Category
  1. General Motors (284)
  2. Ford Motor Company (87)
  3. Mopar (54)
  4. All Trucks (51)
  5. Foreign (125)
 

RetroSound Radios

Items 21 to 30 of 562 total Page:
  1. Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction
Retrosound MUSTANG 4 X 8 DOOR SPEAKERS 1967-1971
$ 129.00
Designed and tooled from the ground up, the speakers meet the demand of today's high performance amplifiers while maintaining factory dimensions for original location mounting and are compatible with all digital music sources. These models feature neodymium magnet structures which are 5 times more powerful than standard speaker magnets, allowing for a substantial reduction in mounting depth and feature enhanced power handling and heat dissipation characteristics.

NOTE: These 4x8" speakers do NOT come with grilles, they are designed and sized to fit in an OEM or a custom location, due to their ultra thin mounting profile, you can mount it places other speakers cannot fit.
Please note that you are purchasing TWO 4x8" Single Voice Coil speakers, which are full range speakers with a low profile Mylar tweeter assembly, Single Voice Coil System, rigid poly cone, Santoprene surround, 1.37" thin mounting depth
and custom tooled low carbon steel chrome basket.


Power Handling Specs: (60 Watts RMS, 120 Watts Max Power)


Ford Stereo Speaker Fit Guide -- 4 x 8 Inch Speakers

The new RetroSound® RetroMod® R-483N is the speaker solution for Ford Mustangs and Thunderbirds that came with factory 4x8" speakers. Until now the most common solution for these vehicles was to use a 4x6" speaker in some sort of bracket. The R-483N provides 30% more cone area, with a corresponding increase in mid-bass response.

Ford Mustang 1967-71 4x8 Pair R-483N For Mustangs with Stereo Factory Radio
Ford Thunderbird 1966 4x8 Pairs* R-483N For T-Birds with Quadrophonic 8-Track Factory Radio

*1966 T-Birds use one pair of speakers in each door

Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels for 1970-81 Chevrolet Camaro
$ 269.95
These 4x6-inch high-power R-463N speakers are a great way to upgrade the sound in your vintage. They use a neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.77-inches (45mm). Santoprene® surrounds deliver the most natural sound possible with no distortion. Mylar tweeters produce crisp, clear highs.

Add our RetroMat Sound Dampening Material:


Reduces road and wind noise plus lowers heat from your vehicle. Easy to cut 1.4mm thick matting with odorless self-adhesive backing. 3-ply construction: Butyl Rubber Membrane and Closed Cell Foam reduces exterior noise along with squeaks and rattles, Aluminum Sheeting provides thermal insulation and Strong Bitumen Adhesive combine for maximum quiet and easy installation.
•Two 10" x 10" Sheets (covers 1.4 sq ft)
•Great for Door Panels, Floorpans, Trunks, Speaker Kick-panels and more.
•Easy to apply (peel and stick), only 1.4mm thick.
•Reduces noise by as much as 10dB
•Part number MAT-10-SD
Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels for 1968-72 Pontiac LeMans with Factory Air Conditioning
$ 259.95
Deluxe Speakers

These 6.5-inch high-power R-652N speakers are a great way to upgrade the sound in your vintage. They use a neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.8-inches (51mm). Santoprene® surrounds deliver the most natural sound possible with no distortion. Mylar tweeters produce crisp, clear highs. Speaker grills are included.

Add our RetroMat Sound Dampening Material:


Reduces road and wind noise plus lowers heat from your vehicle. Easy to cut 1.4mm thick matting with odorless self-adhesive backing. 3-ply construction: Butyl Rubber Membrane and Closed Cell Foam reduces exterior noise along with squeaks and rattles, Aluminum Sheeting provides thermal insulation and Strong Bitumen Adhesive combine for maximum quiet and easy installation.
•Two 10" x 10" Sheets (covers 1.4 sq ft)
•Great for Door Panels, Floorpans, Trunks, Speaker Kick-panels and more.
•Easy to apply (peel and stick), only 1.4mm thick.
•Reduces noise by as much as 10dB
•Part number MAT-10-SD
Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels for 1968-72 Pontiac GTO with No Factory Air Conditioning
$ 259.95
Magnets are dip-cut to allow for extended pole piece excursion and high output. Speaker grills are included.

Deluxe Speakers

These 6.5-inch high-power R-652N speakers are a great way to upgrade the sound in your vintage. They use a neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.8-inches (51mm). Santoprene® surrounds deliver the most natural sound possible with no distortion. Mylar tweeters produce crisp, clear highs. Speaker grilles are included.

Add our RetroMat Sound Dampening Material:


Reduces road and wind noise plus lowers heat from your vehicle. Easy to cut 1.4mm thick matting with odorless self-adhesive backing. 3-ply construction: Butyl Rubber Membrane and Closed Cell Foam reduces exterior noise along with squeaks and rattles, Aluminum Sheeting provides thermal insulation and Strong Bitumen Adhesive combine for maximum quiet and easy installation.
•Two 10" x 10" Sheets (covers 1.4 sq ft)
•Great for Door Panels, Floorpans, Trunks, Speaker Kick-panels and more.
•Easy to apply (peel and stick), only 1.4mm thick.
•Reduces noise by as much as 10dB
•Part number MAT-10-SD
Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels for 1968-72 Oldsmobile Cutlass with No Factory Air Conditioning
$ 259.95
Deluxe Speakers

These 6.5-inch high-power R-652N speakers are a great way to upgrade the sound in your vintage. They use a neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.8-inches (51mm). Santoprene® surrounds deliver the most natural sound possible with no distortion. Mylar tweeters produce crisp, clear highs. Speaker grilles are included.

Add our RetroMat Sound Dampening Material:


Reduces road and wind noise plus lowers heat from your vehicle. Easy to cut 1.4mm thick matting with odorless self-adhesive backing. 3-ply construction: Butyl Rubber Membrane and Closed Cell Foam reduces exterior noise along with squeaks and rattles, Aluminum Sheeting provides thermal insulation and Strong Bitumen Adhesive combine for maximum quiet and easy installation.
•Two 10" x 10" Sheets (covers 1.4 sq ft)
•Great for Door Panels, Floorpans, Trunks, Speaker Kick-panels and more.
•Easy to apply (peel and stick), only 1.4mm thick.
•Reduces noise by as much as 10dB
•Part number MAT-10-SD
Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels for 1968-72 El Camino with No Factory Air Conditioning
$ 259.95
Deluxe Speakers

These 6.5-inch high-power R-652N speakers are a great way to upgrade the sound in your vintage. They use a neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.8-inches (51mm). Santoprene® surrounds deliver the most natural sound possible with no distortion. Mylar tweeters produce crisp, clear highs. Speaker grilles are included.

Add our RetroMat Sound Dampening Material:


Reduces road and wind noise plus lowers heat from your vehicle. Easy to cut 1.4mm thick matting with odorless self-adhesive backing. 3-ply construction: Butyl Rubber Membrane and Closed Cell Foam reduces exterior noise along with squeaks and rattles, Aluminum Sheeting provides thermal insulation and Strong Bitumen Adhesive combine for maximum quiet and easy installation.
•Two 10" x 10" Sheets (covers 1.4 sq ft)
•Great for Door Panels, Floorpans, Trunks, Speaker Kick-panels and more.
•Easy to apply (peel and stick), only 1.4mm thick.
•Reduces noise by as much as 10dB
•Part number MAT-10-SD
Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels for 1968-72 Chevelle with No Factory Air Conditioning
$ 259.95
Deluxe Speakers

These 6.5-inch high-power R-652N speakers are a great way to upgrade the sound in your vintage. They use a neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.8-inches (51mm). Santoprene® surrounds deliver the most natural sound possible with no distortion. Mylar tweeters produce crisp, clear highs. Speaker grilles are included.

Add our RetroMat Sound Dampening Material:


Reduces road and wind noise plus lowers heat from your vehicle. Easy to cut 1.4mm thick matting with odorless self-adhesive backing. 3-ply construction: Butyl Rubber Membrane and Closed Cell Foam reduces exterior noise along with squeaks and rattles, Aluminum Sheeting provides thermal insulation and Strong Bitumen Adhesive combine for maximum quiet and easy installation.
•Two 10" x 10" Sheets (covers 1.4 sq ft)
•Great for Door Panels, Floorpans, Trunks, Speaker Kick-panels and more.
•Easy to apply (peel and stick), only 1.4mm thick.
•Reduces noise by as much as 10dB
•Part number MAT-10-SD
Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels for 1968-72 Buick Skylark with Factory Air Conditioning
$ 259.95
Deluxe Speakers

These 6.5-inch high-power R-652N speakers are a great way to upgrade the sound in your vintage. They use a neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.8-inches (51mm). Santoprene® surrounds deliver the most natural sound possible with no distortion. Mylar tweeters produce crisp, clear highs. Speaker grills are included.

Add our RetroMat Sound Dampening Material:


Reduces road and wind noise plus lowers heat from your vehicle. Easy to cut 1.4mm thick matting with odorless self-adhesive backing. 3-ply construction: Butyl Rubber Membrane and Closed Cell Foam reduces exterior noise along with squeaks and rattles, Aluminum Sheeting provides thermal insulation and Strong Bitumen Adhesive combine for maximum quiet and easy installation.
•Two 10" x 10" Sheets (covers 1.4 sq ft)
•Great for Door Panels, Floorpans, Trunks, Speaker Kick-panels and more.
•Easy to apply (peel and stick), only 1.4mm thick.
•Reduces noise by as much as 10dB
•Part number MAT-10-SD
Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels for 1960-66 GMC Truck with speakers and dampening
$ 159.95
Standard Speakers

The S-62 speakers feature a standard ceramic magnet that provides for exceptional power handling. UV-treated foam surrounds provide a smooth, natural sound and mylar tweeters produce crisp, clear highs. Magnets are dip-cut to allow for extended pole piece excursion and high output. Speaker grills are included.

Add our RetroMat Sound Dampening Material:


Reduces road and wind noise plus lowers heat from your vehicle. Easy to cut 1.4mm thick matting with odorless self-adhesive backing. 3-ply construction: Butyl Rubber Membrane and Closed Cell Foam reduces exterior noise along with squeaks and rattles, Aluminum Sheeting provides thermal insulation and Strong Bitumen Adhesive combine for maximum quiet and easy installation.
•Two 10" x 10" Sheets (covers 1.4 sq ft)
•Great for Door Panels, Floorpans, Trunks, Speaker Kick-panels and more.
•Easy to apply (peel and stick), only 1.4mm thick.
•Reduces noise by as much as 10dB
•Part number MAT-10-SD
Learn More

Add to Wishlist | Add to Compare

Retrosound Kick Panels for 1956-70 Volkswagen Beetle Convertible
$ 154.99
•1956-70 VW Beetle Convertible kick panels
•Angled speaker mount for better dispersion
•Attractive black textured finish
•Can be painted to match your classic vehicle's interior
• Fit most 6.5-inch speaker systems
Learn More

Add to Wishlist | Add to Compare

Items 21 to 30 of 562 total Page:
  1. Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction