MikeHaganAntiqueAutoRadio.com

Skip to Main Content »

Search Site

Select Your Currency

Browse By

Category
  1. General Motors (281)
  2. Ford Motor Company (89)
  3. Mopar (54)
  4. All Trucks (52)
  5. Foreign (118)
 

RetroSound Radios

Items 11 to 20 of 554 total Page:
  1. Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction
Retrosound RetroSound "Retromod" 4 x 10 Dual Voice Coil Speaker
$ 75.00
Specifications
Part Number: R-410N {Single Dual Voice Coil Speaker Only}
Dimensions:
Width: 10 in.
Height: 1.8 in.
Length: 4 in.
Weight: 2.5 lb. Learn More

Add to Wishlist | Add to Compare

Retrosound RetroSound "RetroMod" 6 x 9 Dual Voice Coil Speaker
$ 75.00
Specifications
Part Number: R-69N {Single Dual Voice Coil Speaker Only}
Dimensions:
Width: 9 in.
Height: 1.8 in.
Length: 6 in.
Weight: 3 lb.

Price: Learn More

Add to Wishlist | Add to Compare

Retrosound RetroSound "RetroMod" 4 x 6 Speaker
$ 79.00
Specifications
Part Number: R-463 {Sold as a Pair}
Dimensions:
Width: 6 in.
Height: 1.3 in.
Length: 4 in.
Weight: 3.5 lb Learn More

Add to Wishlist | Add to Compare

Retrosound RetroMod™ R-693N 6x9" 200 watt 3 way Upgraded Replacement Speakers (sold as a pair)
$ 139.00
This pair of 6X9" speakers come complete with wire mesh grilles, and are designed and sized to fit in an OEM locations, due to their ultra thin mounting profile, you can mount them places other speakers cannot fit. Please note that you are purchasing a pair of 6X9" speakers,, which is a full range speaker with a flush mount 2 way dual Mylar tweeter assembly, Single voice coil, rigid pulp composite cone, Santoprene surround, 1.77" ultra thin mounting depth and custom tooled low carbon steel chrome basket.

Power Handling Specs: (100 Watts RMS, 100 Watts Max Power each speaker)
175
Learn More

Add to Wishlist | Add to Compare

Retrosound RetroMod™ 6.5" 100 watt 2 way Upgraded Replacement Speakers (sold as a pair)
$ 89.00
This 6.5" round speakers NOW come with mesh grills and are designed and sized to fit in an OEM or a custom location, due to their ultra thin mounting profile, you can mount it places other speakers cannot fit. Please note that you are purchasing TWO 6.5" Single Voice Coil speakers, which are full range speakers with a flush mount Mylar tweeter assembly, Single Voice Coil System, rigid pulp composite cone, Santoprene surround, 1.77" ultra thin mounting depth and custom tooled low carbon steel chrome basket.

Power Handling Specs: (50 Watts RMS, 100 Watts Max Power)
Specifications
Part Number: R-652 {SOLD AS A PAIR}
Dimensions:
Width: 6.5 in.
Height: 1.8 in.
Length: 6 in.
Weight: 4.5 lb. Learn More

Add to Wishlist | Add to Compare

Retrosound Retromod 6.5" DVC Speaker
$ 65.00
Available 10/22, order now! This is our new DVC version of our 6.5" speaker, this DVC speaker is handy for vehicles that had a single speaker mount in the back seat area (impalas, etc) You can connect 2 channels of audio to this speaker. For unique mounting situations, this speaker comes equipped with a threaded input that is compatible and comes with our UB1KT (Universal bracket kit). NOTE: Due to the specialized nature of this speaker, a grille is not included with it.
Learn More

Add to Wishlist | Add to Compare

Retrosound Retromod 5 x 7 Dual Voice Coil Speaker
$ 65.00
The Dual Voice Coil design allows you to connect 2 stereo channels from your radio to one speaker, providing you with maximum sound for a single speaker application! These types of speakers are generally used in "Classic" cars that only have one speaker location in the dash or the rear deck area, being able to connect 2 stereo channels to one speaker provides for a fuller, richer sound that a mono or single voice coil speaker cannot provide.

This 5x7" speaker does not have a grill and is designed and sized to fit in an OEM location (NOTE: these and other modern speakers are generally not for use with original radios unless they can handle 4 or 8 ohm impedance loads)-, due to its ultra thin mounting profile, you can mount it places other speakers cannot fit. Please note that you are purchasing ONE 5 x 7" Dual Voice Coil speaker, which is a full range speaker with a flush mount 2 way dual Mylar tweeter assembly, Dual Voice coil system, rigid pulp composite cone, Santoprene surround, 1.77" ultra thin mounting depth and custom tooled low carbon steel chrome basket.

Power Handling Specs: (60 Watts RMS, 100 Watts Max Power)
Specifications
Part Number: R-57N {single speaker only}
Dimensions:
Width: 7 in.
Height: 1.8 in.
Length: 5 in.
Weight: 2.5 lb. Learn More

Add to Wishlist | Add to Compare

Retrosound Radio Face to Body Extension Cable
$ 49.99
This extension cable enables you to mount the radio body of any RetroSound® radio as much as nine feet from the radio face and the two radio shafts. This is very useful in custom installations, or in situations in which there is not sufficient room behind the dash for the radio body. For example, after-market air conditioning often adds ducting that would interfere with the radio body. With this extension cable you can mount the radio body almost anywhere. •Length is 9 feet
Learn More

Add to Wishlist | Add to Compare

Retrosound R-TB8 FULL RANGE SPEAKER SYSTEM
$ 169.99
The RetroSound R-TB8 is a ported full range speaker enclosure. These wedge shaped speaker boxes work great behind the seats of trucks, SUV's, hatchbacks and coupes. They feature an 8-inch bass driver for great low frequency response and soft-dome tweeters for smooth, clear highs. They are finished in a durable gray carpeting and have chrome speaker terminals. Power handling is 175 watts. Price is per two speaker boxes, one for the driver's side and one for the passenger side. Learn More

Add to Wishlist | Add to Compare

Retrosound MUSTANG 4 X 8 DOOR SPEAKERS 1967-1971
$ 119.00
Designed and tooled from the ground up, the speakers meet the demand of today's high performance amplifiers while maintaining factory dimensions for original location mounting and are compatible with all digital music sources. These models feature neodymium magnet structures which are 5 times more powerful than standard speaker magnets, allowing for a substantial reduction in mounting depth and feature enhanced power handling and heat dissipation characteristics.

NOTE: These 4x8" speakers do NOT come with grilles, they are designed and sized to fit in an OEM or a custom location, due to their ultra thin mounting profile, you can mount it places other speakers cannot fit.
Please note that you are purchasing TWO 4x8" Single Voice Coil speakers, which are full range speakers with a low profile Mylar tweeter assembly, Single Voice Coil System, rigid poly cone, Santoprene surround, 1.37" thin mounting depth
and custom tooled low carbon steel chrome basket.


Power Handling Specs: (60 Watts RMS, 120 Watts Max Power)


Ford Stereo Speaker Fit Guide -- 4 x 8 Inch Speakers

The new RetroSound® RetroMod® R-483N is the speaker solution for Ford Mustangs and Thunderbirds that came with factory 4x8" speakers. Until now the most common solution for these vehicles was to use a 4x6" speaker in some sort of bracket. The R-483N provides 30% more cone area, with a corresponding increase in mid-bass response.

Ford Mustang 1967-71 4x8 Pair R-483N For Mustangs with Stereo Factory Radio
Ford Thunderbird 1966 4x8 Pairs* R-483N For T-Birds with Quadrophonic 8-Track Factory Radio

*1966 T-Birds use one pair of speakers in each door

Learn More

Add to Wishlist | Add to Compare

Items 11 to 20 of 554 total Page:
  1. Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction