MikeHaganAntiqueAutoRadio.com

Skip to Main Content »

Search Site

Select Your Currency

 

Radio Accessories

Be sure to check out our new Bluetooth Adapter Kits here, Just below are a few videos!

Bluetooth Adapter Kit, Installation
Description: Watch our 'How to...' video for Bluetooth installation



Bluetooth Adapter Kit, Pairing
Description: Watch our 'How to...' video for Bluetooth pairing


Items 41 to 46 of 46 total Page:
  1. Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
Show per page
View as: Grid  List  Sort by Set Ascending Direction
Retrobelt USA's 55-57 Chevrolet 3-Point Retractable Seat Belt System
$ 219.00
Most cars in the early 1960's were not equipped with even 2 point (lap belt) safety systems. Many of these cars are still on the road today and installing our 3 Point system is the best way to make them as safe as possible.

Our 3 Point seatbelt kits feature all chrome, aviation style buckles and hardware. The comprehensive mounting hardware that is included in the Universal kits (from anchors to bolts) are Grade 5 hardness to ensure maximum safety.

Our safety belt systems are federally approved and meet or exceed Federal Motor Vehicle Safety Standards. For further ease of installation, Retrobelt offers as standard webbing length: 28" of webbing on the buckle end and 135" of length on the retractor side to aid installation flexibility.
Retro Belt USA, We provide a Federally Approved combination of today's safety technology with yesterday's classic car!


Learn More

Add to Wishlist | Add to Compare

HPA1 Amplified Hide-away Antenna
$ 24.95
The new RetroAntenna™ HPA1 amplified hide-away antenna from RetroSound® allows you to get great AM/FM reception without having to use standard fender-mount or window antennas. The HPA1 installs in seconds, using a standard Motorola antenna plug and your radio’s power antenna wire, and can be installed almost anywhere in your vehicle thanks to the supplied 105-inch antenna cable and power lead. Never worry again about a stolen or damaged fender-mount or roof-mount antenna. This antenna uses active magnetic field circuitry for enhanced radio reception. (Note: This antenna is designed for mounting inside a vehicle, and is not weather or heat resistant)

-- High gain AM/FM Hide-away antenna
-- Hide it behind your dash for a clean, unobtrusive installation
-- Installs in seconds, using a standard Motorola antenna plug and your radio’s power antenna lead
-- Active magnetic field circuitry
-- 105-inch cable to install antenna virtually anywhere in your vehicle.
-- No more worries about a broken or stolen antenna
-- Antenna dimensions (box only) : 4"W x 1" H x 1" D Learn More

Add to Wishlist | Add to Compare

Compact Powered 8" Subwoofer
$ 179.00
New version of the Sub-8100 shipping now with remote subwoofer level control!--

Retrosound’s new powered subwoofer is an excellent addition to your classic vehicle’s audio system. The compact footprint and powerful bass response will allow for behind the seat mounting options for pick up truck owners, under seat mounting for bench or bucket seats and numerous other in - car applications. The rigid die cast aluminum chassis and powerful Class D amplifier allow this sub to reproduce low frequencies down to 35Hz. (NOTE: SCROLL DOWN TO SEE MORE!) Here's in install video for the sub!
Learn More

Add to Wishlist | Add to Compare

Bluetooth Adapter Kit
$ 39.95
INSTALLATION
Install videos located toward the bottom of this page

Your adapter kit includes an 18" extension cable with a threaded panel mount jack. The jack can be installed in sheet metal up to .093" (13 GA) thick. Drill a 1/4" hole in the desired position. It should be placed near the radio and the cigarette lighter, on the underside of the dash where it is out of sight but easy to reach and will not interfere with the driver's legs. Plug the other end of the extension cable into the AUX input jack on the back of the radio. Note: Your dash may have a stiffener welded to the underside of the dash which will exceed the .093" max thickness.

* Insert the 3.5 mm plug from the Bluetooth® adapter into the 3.5 mm jack.
* Plug the Bluetooth® adapter into the 12-volt cigarette lighter socket.
* Turn the radio on. See your radio instructions for how to enable the AUX input (varies with model).

PAIR YOUR DEVICE
* Press and hold the center (Play/Pause/Answer) button until the left and right buttons start flashing.
* Go to the Bluetooth settings on your phone, make sure Bluetooth is enabled.
* Some phones will require you to search for new connections.
* Select BC10 AUDIO from the list of accessories.
* When paired successfully, the left and right buttons will become solid blue.
* Some phones will ask if you want to connect. Select 'Yes'.

Note: Only one device can be paired at any time. To pair a different phone, repeat the pairing instructions above for each device.

Hands-free phone calls: If the radio is on and in the aux mode, your phone will connect automatically. When an incoming call is detected, press the center button. The call will be answered and routed through your radio speaker(s). To hang up, press the center button again.

Managing music: You can play your own music selections or streaming audio the same way you would on your headphones. Press the center (Play/Pause/Answer) button and your radio will play whatever is selected on your phone. Press the left or right buttons to repeat a selection or skip to the next song (may not work with all phones). Press the center (Play/Pause/Answer) to pause, press it again to un-pause. If a call comes in while listening to music, the music will automatically pause.

BE SAFE: Make sure you are familiar with these operations before you go out on the road. Texting while driving is dangerous and illegal in many states. Driving demands your full attention. Remember: not all drivers have hands-free phones, so the guy next to you may be driving while distracted. Learn More

Add to Wishlist | Add to Compare

67-75 Chevy Camaro/ Pontiac Firebird 2 Passenger 3- Point Seat Belt Kit
$ 219.00
Most cars in the early 1960's were not equipped with even 2 point (lap belt) safety systems. Many of these cars are still on the road today and installing our 3 Point system is the best way to make them as safe as possible.

Our 3 Point seatbelt kits feature all chrome, aviation style buckles and hardware. The comprehensive mounting hardware that is included in the Universal kits (from anchors to bolts) are Grade 5 hardness to ensure maximum safety.

Our safety belt systems are federally approved and meet or exceed Federal Motor Vehicle Safety Standards. For further ease of installation, Retrobelt offers as standard webbing length: 28" of webbing on the buckle end and 135" of length on the retractor side to aid installation flexibility.

Retro Belt USA, We provide a Federally Approved combination of today's safety technology with yesterday's classic car!


Learn More

Add to Wishlist | Add to Compare

65-73 Ford Mustang 2 Passenger 3- Point Seat Belt Kit
$ 219.00
Most cars in the early 1960's were not equipped with even 2 point (lap belt) safety systems. Many of these cars are still on the road today and installing our 3 Point system is the best way to make them as safe as possible.

Our 3 Point seatbelt kits feature all chrome, aviation style buckles and hardware. The comprehensive mounting hardware that is included in the Universal kits (from anchors to bolts) are Grade 5 hardness to ensure maximum safety.

Our safety belt systems are federally approved and meet or exceed Federal Motor Vehicle Safety Standards. For further ease of installation, Retrobelt offers as standard webbing length: 28" of webbing on the buckle end and 135" of length on the retractor side to aid installation flexibility.

Retro Belt USA, We provide a Federally Approved combination of today's safety technology with yesterday's classic car!


Learn More

Add to Wishlist | Add to Compare

Items 41 to 46 of 46 total Page:
  1. Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
Show per page
View as: Grid  List  Sort by Set Ascending Direction
 

My Cart

You have no items in your shopping cart.